Eurotech PCN-1001, User Manual

Page: 37 / 118

Step
3: Configure the network between PCN-1001 and Host PC PCN-1001 User manual
37
PCN-1001_UserMan_En_4.0
Step 3.3: Configure the network on the Host PC
1. Open the “Network Connections”. A dialog-box similar to the one shown below will appear
2. Double-click on the appropriate “Local Area Connection”, in the
example above we have named the connection “PCN-1001” for
clarity
3. The “Status” dialog box will appear
4. Click on the “Properties” button
5. A “Properties” dialog box similar to the one on the right will appear
6. Ensure that the following components are installed:
• Client for Microsoft Networks
• Internet Protocol (TCP/IP)
Note:
• If any of the components listed in step 6 are missing, add them before proceeding any further.
• If in any doubt, contact your system administrator for further instructions.