Eurotech PCN-1001, User Manual

Page: 93 / 118

Test
an RS485 connection and use the RS485_GUI PCN-1001 User manual
93
PCN-1001_UserMan_En_4.0
ker_version
Command ker_version
Command Description
Returns the PCN-1001 Kernel version
Parameters
Parameters Description
Returns String containing the Kernel version number (e.g.: “2.1”)
output0 / output1
Command output0 / output1
Command Description
Sets the optocoupled outputs open time.
For further information see the chapter: “The I/O settings tab-
Optocoupled I/O).
Parameters Un unsigned short (2 bytes)
Parameters Description Value indicating output open time (in milliseconds).
This value must be a multiple of 4 and included in the range between a
8 and 1020
Returns
pcn1001_status
Command
pcn1001_status
Command Description Returns the PCN-1001 diagnostic status
Parameters
Parameters Description
Returns
Returns one unsigned char (1byte) that indicates the diagnose status:
• If it is 1 the diagnose is positive (no problems occurred)
• If it is 0 the diagnose is negative (there is a problem)
reset
Command reset
Command Description
Resets the values of the incoming and outgoing counters
Parameters
Parameters Description
Returns
sdatetime
Command sdatetime
Command Description
Sets date and time in the PCN-1001
Parameters String
Parameters Description String containing the date and time.
Example: 21 May 2006 at 15:39 = “052115392006”
Returns