Eurotech PCN-1001, User Manual

Page: 29 / 118

Find
the best mounting location PCN-1001 User manual
29
PCN-1001_UserMan_En_4.0
How to connect two PCN-1001 devices in Wide-gate configuration
Essential requirements:
• Both counters must be aligned with the other, and both with respect to the gate
• The distance between the centres of each counter must be 60.0 cm
• A = B
Procedure:
1. Make sure M1 of the Master receives the power supply and the communication interfaces. Power MUST be
available on pins L & M of the M1 Connector of the Master as this supplies power to the Slave.
2. Make sure M2 of the Master gives power and the communication interfaces to M1 of the Slave.
NOTE:
For demonstration applications the following cable kits can be used to simplify the connections above:
• The CBL-1001-00 cable kit can be used to connect the Master (see page 100)
• The CBL-1001-01 cable kit can be used to connect the Slave to the Master (see page 103).