Eurotech PCN-1001, User Manual

Page: 113 / 118

Standards
Compliance PCN-1001 User manual
113
PCN-1001_UserMan_En_4.0
Standards Compliance
TEST
STANDARD FOLLOWED RESTRICTION TYPE ROUTINE
Visual inspection EN 50155 Section 10.2.1 * *
Performance test
EN 50155 Section 10.2.2 Low limit: 9V
High limit: 32V
Interruption: Class 1 (no interruptions)
* *
Cooling test
EN 50155 Section 10.2.3 Class T1: -20°C (§ 10.2.3) * -
Dry heat test EN 50155 Section 10.2.4 Class T1: +55°C (§ 10.2.4) * -
Power supply over-voltages EN 50155 Section 10.2.6.1 40V for 100ms (1ohm) * -
Surges
EN 50155 Section 10.2.6.2
(EN 50121-3-2)
On Battery:
• Waveform A
• 1,8 kV 5/10 us, Rs=100Ω
• Performance criteria B
* -
Transient burst susceptibility
test
EN 50155 Section 10.2.7
(EN 50121-3-2 / EN 61000-4-4)
On I/O ports and Battery:
• +/- 2 kV (peak)
• 5/50 Tr/Th ns
• 5 kHz Rep. Frequency
* -
Conducted radio frequency
susceptibility test
EN 50155 Section 10.2.8.1
(EN 50121-3-2 / EN 61000-4-6)
On I/O ports and Battery:
• 10 Veff (carrier voltage)
• 0,15 – 80 MHz, 1 KHz, 80 % AM
• Source impedance: 150 Ω
• Performance criteria: A
* -
Radio frequency susceptibility
test
EN 50155 Section 10.2.8.1
(EN 50121-3-2/ EN 61000-4-3)
On the enclosure port:
• 20 V/m
• 80 MHz 1 GHz, 1 KHz, 80 % AM
• Source impedance: 150 Ω
• Performance criteria: A
* -
Radio frequency susceptibility
test with pulse modulation
ENV50204 On the enclosure port:
• 10 V/m
• 900 MHz +-5 MHz
• 1,89 GHz +-10 MHz
• Performance criteria: A
* -
Electrostatic discharge EN 61000-4-2 /A1 /A2 On the enclosure port:
• 6KV contact discharge
• 8KV air discharge
• Performance criteria: B
* -
Conducted emission EN 55022 / A1
EN 50155 Section 10.2.8.2
(EN 50121-3-2 / 55011 )
On Battery:
• 0,15 – 0,5 MHz: 66- 56 dB μV
• 0,5 – 5 MHz: 56 dB μV
• 5 – 30 MHz: 60 dB μV
• quasi-peak measured at 3m
* -
Radiated emission
EN 55022 / A1
EN 50155 Section 10.2.8.2
(EN 50121-3-2 / 55011)
On the enclosure port:
• 30 – 230 MHz: 40 dB μV/m
• 230 MHz – 1 GHz: 47 d B μ V/m
• quasi-peak measured at 3m
* -
Insulation resistance
EN 50155 Section 10.2.9 500Vac@1min * -
Electrical transient conduction
along supply lines.
ISO-7637-2
Pulses: 1, 2a 2b, 3a 3b, 4
Test level: III
Functional status: Class D
* -
Radiated emission ECE ONU Regulation 10 * -
Random vibrations
EN 50155 Section 10.2.11
EN61373 (ed. 2000) Section 8
Category 1 Class B * -
Simulated long life testing EN 50155 Section 10.2.11
EN61373 (ed. 2000) Section 9
Category 1 Class B * -
Shocks EN 50155 Section 10.2.11
EN61373 (ed. 2000) Section 10
Category 1 Class B * -
Safety
EN 60950
Essential constraints defined in the
standard
* -
* Performed
- Not performed