Eurotech PCN-1001, User Manual

Page: 36 / 118

Step 3: Configure the network between PCN-1001 and Host PC PCN-1001 User manual
36
PCN-1001_UserMan_En_4.0
Step 3: Configure the network between PCN-1001 and
Host PC
Step 3.1: Turn on the PCN-1001power
1. Enable the DC power supply output
2. The PCN-1001 will turn ON: the green LED will be ON
3. The PCN-1001 will start to boot: the amber LED will blink
4. When the PCN-1001 is ready to operate both the green and amber LED indicators will be ON (not blinking)
Step 3.2: Connect the PCN-1001 with the Host PC
1. Make sure both the PCN-1001 and the Host PC are turned on and ready to operate before connecting them
together
2. From the Host PC access the CD-ROM and open the “\Software\Drivers” folder and extract all the files
contained in the “pcn-1001-drivers.zip” file
3. Locate:
o the standard Mini-USB type “B” connector under the service plate of the PCN-1001
o
a free standard USB type “A” connector on the Host PC
4. Use a Male Mini USB -B to Male USB type “A” cable to connect the Mini USB port of the PCN-1001 to the
USB port of the Host PC.
You can also use the Male Mini-USB B to Male USB Type “A” cable contained in the CBL-1001-00 Cable
Kit.
5. Once the USB connection has been established the Host PC will detect the new hardware and display the
following message: “Found New Hardware”
6. Shortly after, the Window "Found New Hardware Wizard" will start
7. Select "No, not at this time" and click "Next"
8. Select "Install from a list or specific location (Advanced)" and click "Next"
9. Select "Don't search. I will choose the driver to install" and click "Next"
10. Click "Have Disk"
11. Click "Browse"
12. Open the folder “drivers” that has been created when extracted the zip file (see step 3)
13. The hardware wizard will find the file “linux.inf”; click "Open"
14. Select "OK" in the screen that will appear
15. Click "Next" in the screen that will appear
16. The hardware wizard will now install the driver. Select “Finish” in the screen that will appear
17. The installation procedure will start. Follow the instructions that will appear on the Host PC.
18. Windows will automatically find and install the drivers that are located in the path: \drivers\win2000