18
GB
19
GB
You can consult the meter by pressing the
key.
VII. Charcoal filter meter display
(except modèle 6170D)
V. Relative humidity level display
(1-temperature model only)
VI. Setting the lighting mode
When using the filter for the first time or replacing it, set the meter to 365.
1
Press the
key.
The display will flash.
3
Press the
to confirm
The alarm display will switch off
2
Press the
key to set to 365.
1
Press the
key.
The indicator of the active mode will flash
2
Press the
or
keys to select the desired mode.
3
Press the
key to confirm
The charcoal filter must be replaced ev
ery year.
In a particularly dry envir
onment and/or in not ver
y good
weather conditions (e.g. winter),
you can use the
"Hygro++" humidity kit which allo
ws you to increase the
level of relative humidity inside y
our wine cabinet.
There are 3 setting options for lighting:
Permanent lighting (mood lighting for a cabinet fitted with a glass
door, for example).
Lighting which comes on when the door opens (it is switched off
when the cabinet door is closed).
Lighting disabled
2
。
Precaution :
bright light, never look directly at the LED beam.
Your wine cabinet has a function for measuring humidity levels, allowing
you to see the level of relative humidity inside the appliance, when the
setting is 9 - 15° C.
The ideal level of humidity is above 50% and ideally between 60 and 75 %.
If you want to increase the level of relative humidity in your cabinet, pour
the equivalent of one glass of water into the duct of the tray located on
the bottom right-hand side of the cabinet.
7 - e
veRydAy
mAintenAnCe
Maintenance operations to be carried out approximately once a year
•
Unplug and unload the appliance.
•
Clean the water drain at the bottom of the wine cabinet. Pay attention that nothing is
blocking this drain.
•
Regularly vacuum the condenser at the back of the appliance.
•
Clean the inside of the compartments with water and a gentle cleaning product.
•
Rinse thoroughly.
•
Dry it with a soft rag.
•
Replace the active charcoal filter in the breather hole at the top of your cabinet
•
Remove the charcoal filter manually. It is available from your usual retailer. It must
be replaced by an original manufacturer’s part.
•
Check that the seals are in good condition. It is often necessary to clean the door seal.
Using unsuitable cleaning products can cause premature ageing of the seals. Certain
rules must therefore be followed: whenever you clean the seal, always rinse off any
cleaning product with clear water. All traces of cleaning product must be removed from
the seal. EuroCave Professional only recommends using a mild soapy solution. If this
proves insufficient, it is possible to occasionally use an ethanol-based solution, provided
that the concentration used is less than 10% and that the seal is then rinsed thoroughly
with clear water.
Regular monitoring of your cabinet and r
eporting any
faults to your retailer will ensur
e that your appliance
provides you with many years of faithful ser
vice.
Your EuroCave Professional cabinet is a tried and tested appliance.
Never use cleaning products containing acetone, spirit or alcohol, white
spirit or synthetic thinners which could damage the front of the shelf.
Maintenance of the optional extra “PLUS” equipment:
•
Clean the light strip with a microfibre or soft cloth only. Never use cleaning products containing alcohol.
•
To remove text, written using the white marker pen, from the bottle identification supports ("premium" equipment), use a damp cloth.
•
To clean the fronts of the shelves:
- use a microfibre or soft cloth only
- only use water or a cleaning product designed for glass
Caring for glass elements:
•
To clean the glass elements of your cabinet (all doors and the glass handle supplied with Full Glass doors only), use a non-abrasive soft cloth which has had
a suitable glass cleaning product applied to it.
6 - C
ommissioning
youR
Wine
CABinet
