6
GB
7
GB
A
Cabinet body
B
Setting and control panel
C
Lighting (2 LEDs or 4 LEDs on 6170D model)
D
Light strip (optional extra - except 6170D model)
E
Breather hole + Active charcoal filter except 6170D
model
F
Door catch
G
Sliding shelf
H
Cabint body stiffener (large models only) or shelf
separating the 2 compartments includes the stiffener
(6170D model only) - do not remove
I
Storage shelf
J
Grill
K
Humidity cartridge - 1-temperature model only
L
2 adjustable feet for levelling
M
Lower hinge (x2)
N
Product identification label
O
Fresh air vent (except 6170D model)
P
Door (fitted with a handle and a dual-action lock)
Q
Upper hinge
R
Condensate collection tray with outlet hole
S
Detachable handle (Full Glass doors only)
T
Three screws, three caps (Full Glass doors only)
1 - d
esCRiPtion
oF
youR
Wine
CABinet
The wine cabinet’s power lead has a plug, to be plugged into a standard earthed outlet to prevent
any risk of electric shock.
Have the power supply socket checked by a qualified electrician who will check that it is
correctly earthed and will carry out, if necessary, work to ensure that the socket
complies with current standards.
Contact your usual EuroCave Professional retailer to change the power lead if it is damaged. It
must be replaced by a EuroCave Professional original manufacturer’s part.
If you are moving to a foreign country, check that the supply characteristics of the cabinet
correspond to the country (voltage, frequency).
2 - P
oWeR
suPPly
For your personal saf
ety, the wine
cabinet must be cor
rectly earthed.
Ensure that the sock
et is correctl
y
earthed and that y
our installation is
protected by a cir
cuit breaker
(30 mA*)
*Not applicable to some countries.
C
E
F
H
I
O
G
K
R
J
B
Q
D
N
M
P
A
L
3 - P
RoteCting
the
enviRonment
And
sAving
eneRgy
The wine cabinet’s power lead has a plug, to be plugged into a standard earthed outlet to prevent
any risk of electric shock.
Have the power supply socket checked by a qualified electrician who will check that it is
correctly earthed and will carry out, if necessary, work to ensure that the socket
complies with current standards.
If you are moving to a foreign country, check that the supply characteristics of the cabinet
correspond to the country (voltage, frequency).
Disposal of packaging
All packaging used by EuroCave Professional is made
from recyclable materials.
After unpacking your cabinet, take the packaging to
a refuse collection point. For the most part, it will be
recycled.
Recycling: a caring gesture
Electrical and electronic equipment can have a harmful effect on the
environment and human health owing to the presence of hazardous
substances.
You should never therefore trash electronic and electrical equipment with
unsorted municipal waste.
When purchasing a new EuroCave Professional product, you can entrust
recycling of your old appliance to your EuroCave Professional retailer.
Speak to your EuroCave Professional retailer. He will explain the removal
and collection arrangements set up in the EuroCave Professional network.
In compliance with legislation relating to protecting and caring for the
environment, your wine cabinet does not contain C.F.C.s or H.C.F.Cs.
To save energy
•Install your wine cabinet in a suitable location (see following page) and
observe the recommended temperature ranges.
• Keep the door open for as short a time as possible.
•Ensure that the door seal is in good working order and that it is not
damaged. If it is, contact your EuroCave Professional retailer.
Disable any unusable appliances by unplugging them and cutting off the
power lead.
4 - i
nstAlling
youR
Wine
CABinet
Unpacking
•
When your cabinet is delivered, check the outside for signs of damage
(impact, warping…).
•
Open the door and check that the various elements inside are intact
(walls, Main du Sommelier supports, hinges, bottle support…).
•
Remove the protective elements found inside and outside your cabinet
including the lower hinge protector (see diagram (1))
•
Fit the cap (see diagram 2), found in the accessories bag, used for sealing
the hole in the lower hinge.
Precautions
•
Do not place your cabinet in an area liable to flood.
•
Do not place your cabinet close to a source of heat or expose it to
direct sunlight
•
Prevent water from splashing on any parts of the rear of the machine.
•
Arrange the power lead so that it is accessible and does not come into
contact with any of the appliance’s components.
•
Tilt the cabinet slightly backwards in order to adjust the front feet (by
screwing or unscrewing them) so that you can level your cabinet (spirit
level recommended).
1
2
S
T
