14
GB
15
GB
II. Adding or changing the position of a storage shelf AXUH2
III. Assembly and use of shelf labels
(supplied with ACMS2 and AXUH2 shelves)
b.
c.
Note
: to install a storage shelf the back section of which rests on the ledge, located at the back of the cabinet, fit 2 rack support pins at
the front to support the front section of the shelf (pins supplied in the accessories bag).
The same applies if you place a storage shelf just above the stiffener, position two rack support pins at the back of the cabinet (for large
models only).
The shelf labels in epoxy coated steel allow you to identify your bottles and locate
them easily. White marker pen supplied in the accessories bag (erasable).
1
2
a.
1
2
b.
c.
d.
back
wall
1. Connection and starting up
Wait 48 hours before plugging in your wine cabinet.
To switch it on, press and hold down button
for 5 seconds.
Have your plug checked (presence of fuses, amps and 30 mA
circuit breaker).
Do not plug several cabinet into a multi-socket.
II-A. Description
(1-temperature 6074V, 6182V model)
N
M
E
D
C
F
B
A
G
H
I
L
K
J
6 - C
ommissioning
youR
Wine
CABinet
A
Lighting mode
B
Open door alarm
C
Temperature zone
D
Sensor fault alarm
E
Temperature alarm
F
Charcoal filter alarm
G
Confirmation and setting access key
H
Setting and selection keys
I
Lighting mode confirmation and access key
J
Charcoal filter meter access key
K
Standby key
L
Humidity level alarm
M
Relative humidity level display
N
Heater in-use light
O
Compressor in-use light
P
Temperature display
II-B. Temperature setting
The tactile keys are very sensitive.
There is no need to apply force, only a
light touch is required to register the
command.
Remember to remove your finger from
the panel between each press.
5 sec.
Press and hold down the
key for 5 seconds to start up.
1
Press and hold down the
key for approximately 5 seconds.
The display will start to flash
3
Press the
button to confirm
2
Press the
or
keys to set the desired temperature
Transforming y
our wine maturing
cabinet into a
wine serving
cabinet: you can use y
our 1-temperatur
e cabinet as a wine
serving cabinet to bring y
our white or red wines to the cor
rect
serving temperatur
e
(temperature setting possib
le from 5 - 20 °C / 41 - 68°F):
•
for white wine: r
ecommended setting rang
e: 6 -10°C / 43 - 50°F
•
for red wine: recommended setting rang
e: 15 -18 °C/ 59- 64°F
This cabinet can ther
efore be used as a r
ed or white wine
serving cabinet
The value shown on the display is the actual temperature inside
the cabinet. It is therefore necessary to wait before your new
setting takes effect.
•
The default setting is 12 °C / 54°F (ideal maturing temperature).
However, you can set the temperature from 5 to 20 °C / 41 to 68°F.
•
Recommended temperature setting range for maturing wine:
10 -14 °C / 50 - 57°F.
N.B.:
to function correctly, your cabinet must be placed in a room with a
temperature of 10 - 35 °C / 50 - 95°F (solid door) or 10 - 30 °C / 50 - 86°F
(glass door).
To ensure that your cabinet functions optimall
y, we
recommend that you fill it to at least 75 % of its ca
pacity.
5 - l
Ayout
– s
toRAge
