background image

A - 4

Euphonix CS3000/2000 Operation Manual

Appendix 2: Titles andFiles

1. Projects and Titles are both stored as “directories” on the disk

Project directories are labelled with a ".PRO" extension and Title directories are labelled with a ".TTL" extension.
Title directories can exist only within project directories.

Example: The DOS path for a given Title may be “d:\proj01.pro\title_01.ttl”

2. Files stored within a Title Directory

Created

The following files can be found within a Title Directory…

TITLE.FIL

Stores data associated with a Title.
Contains:

30 character Title Name shown by Mixview
Title Comments
Cube Aux/Film Panning/Dynamics Assignments/Setup
Title Setup Data (Head, Tail, etc.)
Cue List

TITLE.BAK

A backup copy of TITLE.FIL

_TITLE_.BAK A copy of the previous TITLE.FIL
_TITLE_.SAV A copy of the previous _TITLE_.BAK

Mixview includes  Automatic Title file recovery.

UNTITLIX.MIX

Stores data for Titles with no Mix loaded - <Untitled Mix>

MYMIX_01.MIX

Stores data for a given Mix - <My Mix 01>
Contains:

30 character Mix Name shown by Mixview
Mix Comments
Groups Setup Data
Template
Console Mix Snapshot
Low Level CUBE Mix Snapshot
Aux CUBE Mix Snapshot
Panning CUBE Mix Snapshot
MIDI Mix Snapshot
Dynamic Automation Data
Automated Snapshot List

SNAPSHOT.CS2

Contains Console User Snapshots.

SNAP.USR

Contains Console User Snapshots Names.

SNAPSHOT.DSC

Contains MIDI User Snapshots.

CUBESNAP.001

Low Level CUBE User Snapshots

version 2.5

AUXSNAP.003

CUBE Aux User Snapshots

version 2.5

AUXSNAP.001

Backup of Aux User Snapshots

version 2.4

SNAPSHOT.AUX

*Previous name of Aux User Snapshots

AUX_BUS.002

CUBE Aux Bus User Snapshots

version 2.5

SNAPSHOT.BUS

*Previous name of CUBE Bus User Snapshots.

CUBE_PAN.001

CUBE Film Panning  User Snapshots

version 2.5

SNAPSHOT.MT

*CUBE Multi-Track User Snapshots.

pre-version 2.5

USER_SS.D01

Contains the Dynamics User Snapshots.

version 2.4

UNTITLIX.D01

Contains the Dynamics Mix Snapshot for the Untitled Mix.

version 2.4

MYMIX_01.D01

Contains the Dynamics Mix Snaphot for a given Mix.

version 2.4

SNAPSHOT.DSS

*Contains the Dynamics User Snapshots.

version 2.3

UNTITLIX.DSS

*Contains the Dynamics Mix Snapshot for the Untitled Mix.

version 2.3

MYMIX_01.DSS

*Contains the Dynamics Mix Snaphot for a given Mix.

version 2.3

*Denotes files which are currently inactive.

Summary of Contents for MixView CS2000





































































































































































































































































































































Reviews: