Euphonix MixView CS2000, Operation Manual

Page: 35 / 324

Section 1: Introduction
Euphonix CS3000/2000 Operation Manual 1 - 21
1
2
4
6
8 1
2
4
6
8
ComMic
Talk
Rec
Auto
Loc
Rec Rec Rec Rec
Track Assign Keys
Transport Controls
Monitor Section
These keys are for future implementation. At this time the displays are used to
monitor MIDI timecode returning to the DSC. Note: this reader does not
display frames.
The Transport keys are used for MIDI Machine Control of compatible tape
transports such as the Tascam DA-88™ and the Alesis ADAT™.
These keys allow the user to control external machines that support MIDI
Machine Control protocol, as well as to control the automation without
external code using the console’s VTM (Virtual Tape Machine). The MMC keys
support Play, Record, Stop, Forward, Rewind, Cycle, Shuttle, Locate to Cue,
Next Cue, Last Cue, and RollBack.
The Euphonix VTM is effectively an internal timecode generator. When the
DSC
Mstr Ctrl and T/C Slave keys are off, then internal timecode can be
generated. See the Tutorial and Automation sections for additional details.
This section is for future implementation. Currently, all monitor facilities are
controlled via the Master Module.