Euphonix MixView CS2000, Operation Manual

Page: 173 / 324

Section 7: Automation
Euphonix CS3000/2000 Operation Manual 7 - 11
Pass Control
The Pass Control screen is one of the most useful tools in the Euphonix Mix
System. To access this screen, press the [
Pass Ctrl ] key next to the Pass Rec
key.
The Pass Control screen shows the pass tree, cue points, automated snapshot
events, aux moves, EQ, pan moves, fader moves and mutes.
The first thing on the screen is the pass tree. There are 8 passes in the mix
shown above. The currently selected pass is indicated in green on the pass
tree and also to the left of the pass tree. Blue indicates saved passes.
To the right of the pass tree you will see the event count of the currently
selected pass and the cumulative event count of the entire mix from that pass
back to the start. This is followed by the start and end timecode points of the
currently selected pass.
Allows setting of start and end points for automation editing.
Displays cue points. A Cue list can be generated “on-the-fly” and used for
quick locating and cycling. These cue points are graphically displayed on this
line for reference.
Displays automated snapshot event times and snapshot number. Automating
snapshots is covered later in this section.
When the pass is finished, a graphic display of aux knob movements or EQ
parameters will appear along the time line.
When the pass is finished, a graphic display of pan knob movements left and
right of a center line will appear above and below the time line respectively.
Pass Tree
CUES
AUX A-D
PAN BAL
Event Count
SNAPS
Screen Anatomy
EDIT
Current pass
start & end
times
Window view times
Current Pass
Grey shaded lines
and black blocks
represent mutes
Title Head mark
Event
Counts
Title Tail mark
Selected channel
Cnfigurable to
show Aux or EQ
Automated
SnapShot