Euphonix MixView CS2000, Operation Manual

Page: 240 / 324

Section 9: Dynamics
9 - 24 Euphonix CS3000/2000 Operation Manual
Adjusting the Dynamics
& Filters
Once the processors are assigned and configured, we can adjust dynamics
settings while listening to the effect on the audio signal:
Press the DSC [ Dyn ] key:
As soon as the [ EQ•Dyn ](1) attention key is pressed to access dynamics from
the channel strip, the DSC screen shows the transfer graph of the processor
and adjustments can be made. The MIDI indicator on the front panel of the
specific processor lights when adjustments are being made to confirm that the
console is communicating with that channel of the ES108A.
The DSC allows you to toggle back and forth between Dynamics and EQ
access on a specific channel. Press the DSC [
EQ ] key to begin adjusting EQ.
Press the DSC [ Dyn ] key. The screen switches to allow dynamics adjustment
of the same channel as the EQ.
Dyn EQ
Pg 1 Pg 2 Pg 3 Pg 4
Aux Pan
Assign
MIDI
Key Mon
2
4
6
9
12
15
21
30
“MIDI” indicator confirms
communication with console
4
16 13 14 15
!
1
@
2
#
3 $
4
Q W E
1 2 3
tab
25
shft
26
A
27
S
28
D
EQ•Dyn
BUS
1
2
L
R
ovld
PAN BAL
Lit LED shows that a
dynamics processor is
present and in circuit
(NOT bypassed)
Now hit the appropriate [ EQ•Dyn ]
attention key in the channel lower fader
block to access dynamics parameter
adjustments
Like EQ indication, an unlit LED
indicates that the dynamics processor
is either bypassed or unassigned.
Or use the DSC Route keys
as a shortcut to access
individual dynamics
processors