Euphonix MixView CS2000, Operation Manual

Page: 186 / 324

Section 7: Automation
7 - 24 Euphonix CS3000/2000 Operation Manual
Edit Operations
Automation
Editing
F3 F1 F2 F4
F3 F1 F2 F4
F3 F1 F2 F4
Clr? Pack? Edit Util
COPY ? [Yes] Tplt T/C
Pass 0 Undo? Redo?
Pass
Ctrl
The Monitor Before Record (MBR) automation feature also applies to auto-
mated EQ (see the Automation Editing section ealier in this section for a
discussion of MBR). EQ moves work only in ABSolute mode and the Win, Wout
and Wthru applies to EQ.
The Off-Line Editing system provides Cut, Copy, Insert, Overwrite, Fill, Gap,
Repeat, Bounce & Distribute functions. These allow the operator to piece
together the automation data of various objects (Fader, On, Pan and now EQ)
from current or previous passes within a mix, forming a custom pass. In some
operations, automation data may be inserted into dissimilar objects of the
console, i.e., from a fader into an aux, etc. All of these operations, except
Copy, generate a new pass.
There are ten (10) edit operations available. Press [ Pass Ctrl ], [ F4 ] (down
arrows) and then [ F3 ] (Edit) to access the Edit Operations menu.
From the Edit menu, press [ F1 ] repeatedly to
view the selections. Additionally, the SpinKnob
and [
+ ]/[ – ] keys also cycle the selections while
the Numeric keypad provides a quick selection
method of edit operations.
These operations require that a Mix is loaded and valid auto-
mation data is present. Each of the 10 operations are applied
only to objects selected in the edit template and all can be
applied to multiple blocks simultaneously. 6 are applied only to
the “Edit Region” defined by the green edit Start point and the
red edit End point on the Pass Control screen. 4, Insert, Over-
write, Bounce and Distribute only use the green Start point and
aren’t limited by the edit region. The edit operations are described below
along with their numeric key equivalents.
COPY : Automation data within the edit region is copied into the copy
buffer. Numeric key [ 7 ]
CUT : This is a “butt splice” style of operation. Time and automation data
within the Cut edit region is deleted. The deleted automation data is
copied into the copy buffer. Automation data after the end point is moved
up to the start point. Numeric key [
8 ]
INS (INSERT) : This operation accompanies a Copy operation. Time is
inserted beginning at the selected Start point to make room for the
contents of the copy buffer. Only the Start point is relevant during an
Insert since the duration of the Insert is determined by the contents of
the copy buffer. Numeric Key [
9 ]
Monitor Before Record
(MBR)