Etac R82 Heron, User Manual

Page: 34 / 176

EN
34
etac.com
Service information
Maintenance of a medical device is wholly the responsibility of the owner of that device. Failure to
maintain a device in accordance with the instructions may invalidate the device’s warranty. Furthermore,
failure to maintain a device may compromise the clinical condition or safety of users and/or their
caregivers. Do not perform service and maintenance while the user is in the product.
Maintenance
Before every use it is recommended to:
• wipe off any residue and dirt from the
product using a cloth wrung in warm water
and a mild detergent/soap without chlorine
and dry before use
• carry out a visual inspection, for any
damaged or worn-out parts.
Warewashing machine
This product can be washed at 60° using a mild
detergent for 10 minutes in a washing machine
designed for medical devices. Use the machine’s
drying function to dry the product.
This product can be washed at 85° using a mild
detergent for 3 minutes in a washing machine
designed for medical devices. Use the machine’s
drying function to dry the product.
Before washing
Avoid degreasing of the piston rods, the
actuators should be retracted to minimum stroke
and without load before washing.
• Remove all accessories, unplug all cables
and make sure to dismount the battery,
control-box and handset. Leave the
actuators with the cables mounted on the
product (see page 22)
Do NOT clean the power unit with a high
pressure cleaner or steam cleaner.
After washing
• Ensure correct placement of cables inserted
into the control box when reinstalling the
power unit system (see page 23)
• Check that the handset functionalities works
correct
Disinfection
The product can be disinfected with a 70%
disinfectant IPA solution. It is recommended to
wipe off any residue and dirt from the product,
using a cloth with warm water and a mild
detergent/soap without chlorine and let it dry
before disinfection.
Service interval
A detailed inspection of the product must be
made every 12 months (every 6 months if the
product is used very often - daily use for more
than 7 hours), every time the product is reissued
for use and after a long term storage (more than
4 months). The inspection should be carried out
by a technically competent person who has been
trained in the use of the product.
The lifetime of this product in normal use is 8
years if all maintenance and servicing is carried
out in accordance with the manufacturer’s
instructions and demonstrably recorded. The
device may be reissued within its lifetime.
Service Check List:
Check and adjust the following functions as
per their intended use. Repair or replace any
damaged or worn-out parts. Please check the:
• Cushioning
• Products equipped with a hydraulic pump
for height adjustment. Frame height can be
adjusted up and down
• Powered versions are able to retain power
after charging the battery
• For powered versions, reset the power unit
system using the handset by pressing the
up(f) and down(g) buttons simultaneously
for 5 seconds
• Products equipped with power for height
adjustment. The cables are in good
condition and the handset funtionalities for
height adjustment works as intended.
• Nuts and bolts on the product are tightened
• Oil the swing-away parts
• Fittings and buckles for signs of worn out
parts
• Product for cracks or signs for worn-out
parts
• All labels on the product are intact
Materials
• Stainless steel
• Aluminium
• Plastic
• Rubber
Surface treatment
The following surface treatment processes were
used to protect against corrosion:
• Lacquered surfaces = Polyester powder
coating or ED-coating
• Non-lacquered aluminium parts = Anodized
coating
• Non-lacquered steel surfaces = Galvanized