The app menu <Settings>
Doc. no. BA012498_03
98 / 112
GB
Calibrating light sensors:
Start the calibration process by tapping on<Configure now> under
Configuring via light sensors.
The calibration menu is displayed:
In the selection field, choose the channel for which you wish to cali-
brate the light sensors and confirm your selection.
Tap on <Start>
Use a lux meter to measure the current light value at the required
location, e.g. at a desk. The reading is 600 lux, for example.
Enter the lux value in the field for value 1 and confirm your entry.
The Light Control Box receives the value and dims the luminous
efficiency for the next measurement.
Now measure the light value again using the lux meter. The value is
now lower than the first measurement and reads 550 lux, for example.
Enter this lux value in the field for value 2 and confirm your entry.
The Light Control Box receives the value and dims the luminous
efficiency for the next measurement.
Now measure the current light value using the lux meter. The reading
is 450 lux, for example.
Enter this lux value in the field for value 3 and confirm your entry.
The calibration process for the selected channel is now complete.
The Light Control Box switches the lighting off for a short time.
To exit the calibration menu, confirm the message informing you of
successful calibration. You can then set the light target value for this
channel:
Measurement 1
Measurement 2
Measurement 3
