The remote control menu <Programming>
Doc. no. BA012498_03
61 / 112
GB
8.3.8 Orient. light from h/Orient. light to h
The menu items <Orient. light from h> and <Orient. light to h> specify the
duration of the orientation light using fixed start and end times.
Thanks to the built-in battery, the configured times are also re-
tained in the event of a power failure.
Prerequisites:
• The correct time must be set in the <Calendar> menu. See Section
“Calendar” page 69.
• The setting <Until time> in the <Orient. time mode> menu item must
be enabled. For more information, see Chapter
Orient.
.
time mode
.
Setting the start and end time:
1. Select the <Programming> menu item and confirm the selection with
the
button.
2. Enable programming mode by pressing the
button.
3. Select the
button to choose the menu item <All Channels> and
confirm the selection with the
button.
4. Use the
button to select the <Orient. light from h> menu item
and confirm the selection with the
button.
5. Use the
or
buttons to set the start time and confirm the se-
lection with the
button.
The start time is now set.
6. Press the
button once.
7. Use the
button to select the <Orient. light to h> menu item and
confirm the selection with the
button.
8. Use the
or
buttons to set the end time and confirm the selec-
tion with the
button.
9. End programming mode by pressing the
button.
The duration of the orientation light is now set with a start and
end time.
Setting a start and end time is not the same as timer control.
If the switch-off delay time in normal operation mode and the
switch-off warning time elapse before the orientation light is due
Enter times
Difference from
time switching
control
