The remote control menu <Programming>
Doc. no. BA012498_03
67 / 112
GB
confirm the selection with the
button.
4. Press the
button to select the DALI switch that you wish to regis-
ter as disconnected. Confirm the selection with the
button.
5. End programming mode by pressing the
button.
The selected DALI switch is now disconnected.
8.7.3 DS1/DS2 switch-off delay
This function sets how long the DALI switches keep the connected devices
activated following the last detected movement. You can choose a time of
one to 255 minutes.
Setting the off delay time for DALI switch 1 or 2:
1. Select the <Programming> menu item and confirm the selection with
the
button.
2. Enable programming mode by pressing the
button.
3. Select the
button to choose the menu item <DALI switch> and
confirm the selection with the
button.
4. Select the
button to choose the menu item <DS1 switch-off de-
lay> or <DS2 switch-off delay> and confirm the selection with the
button.
5. Use the
or
buttons to set the required duration and confirm
the selection with the
button.
6. End programming mode by pressing the
button.
The off delay time is set for the selected DALI switch.
8.7.4 DS1/DS2 mode
This function enables more precise configuration of the DALI switches. The
following settings are possible:
Fully automatic
: When this function is active, the DALI switch switches the
connected device on when a presence is detected. This function can then
also be activated if the Light Control Box is operating in semi-automatic
mode.
Semi-automatic
: If this function is active, the DALI switch must be activat-
ed manually if the off delay time in normal operation or override mode has
elapsed.
Pulse mode k:
If this function is enabled, the DALI switch switches devic-
