The app menu <Settings>
Doc. no. BA012498_03
93 / 112
GB
13.1.6 Changing orientation light brightness
The
Orientation light
function provides subtle lighting. You can use the slide
controller to set orientation light brightness to values between 10% and
50% of the maximum illumination level.
The orientation light only switches on once the set off delay time or a set off
warning time have elapsed. The orientation light duration can also be set to
zero minutes.
Setting orientation light brightness:
Move the slide controller until the required percentage value is
reached.
The target brightness is now set.
13.1.7 Setting orientation light afterglow
The length of time for which the orientation light should be lit is referred to
as the “afterglow”. There are two ways to set the afterglow:
• Enter the duration in minutes. Possible values: 0 - 240 minutes.
• Enter the start and end times. Only full hours can be entered as the
times.
Thanks to the built-in battery, the configured times are also re-
tained in the event of a power failure.
Select which type of time setting to use in the menu item
Mode for after-
glow
. Appropriate input fields are displayed after selection.
Prerequisites
