Setting via remote control
Doc. no. BA012498_03
40 / 112
GB
6
Setting via remote control
The Light Control Box settings can be input via remote control. If additional
Light Control Boxes are connected to a Light Control Box, all of the Light
Control Boxes assume the settings of the first Light Control Box.
The infrared remote control Mobil-PDi/MDi-universal (ep10433993) makes
it simple for electricians and users to set parameters and special functions.
This remote control is available as an accessory.
1.
4.
6.
1.
3.
5.
2.
Key button
2. Navigation buttons
,
,
,
3. Home button
4. SD button
5. OK button
6. Return button
For optimum reception, point the remote control directly at the Light Con-
trol Box detector when programming the settings.
In direct sunlight, the standard remote control range of approximate-
ly 8 m may be reduced due to the infrared proportion of sunlight.
The Mobil-PDi/MDi-universal remote control offers functionality for virtually
all ESYLUX remote controls. If ESYLUX makes improvements to the remote
control menus or commands, you can update the universal remote control.
Simply download the latest software version for one of the implemented
remote controls from the ESYLUX website to an SD card. Unscrew the
bottom cover on the rear of the remote control to insert the SD card into the
universal remote control. Select the menu item <System/Software> on the
universal remote control to update the device.
For the settings of the Light Control Boxes with tunable white, select the
X-Light Control TW remote control. Following selection, this remains the
default remote control.
Universal
remote
control
