The remote control menu <Programming>
Doc. no. BA012498_03
71 / 112
GB
the
button.
2. Enable programming mode by pressing the
button.
3. Select the
button to choose the menu item <Calendar> and con-
firm the selection with the
button.
4. Select the
button to choose the menu item <Hours> and confirm
the selection with the
button.
5. Use the
or
buttons to set the hour and confirm the setting
with the
button.
6. Use the
button to return to the Calendar menu.
7. Select the
button to choose the menu item <Minutes> and con-
firm the selection with the
button.
8. Use the
or
buttons to set the minute and confirm the setting
with the
button.
9. Use the
button to return to the Calendar menu.
10. Select the
button to choose the menu item <Seconds> and con-
firm the selection with the
button.
11. Use the
or
buttons to set the seconds and confirm the setting
with the
button.
The time is now set.
12. Press the
button to save your changes and exit programming
mode.
8.10 Factory reset
The
Factory reset
function restores the Light Control Box to its default
program settings. For more information on the default factory settings, see
Section “Factory settings” page 34.
Performing a factory reset:
1. Select the <Programming> menu item and confirm the selection with
the
button.
2. Enable programming mode by pressing the
button.
