PROGRAMMINGS
Pagina
101
Message ( ) playback
and incoming call
The message (11~30 o 91~92), defined by the
parameter, is played back and, once it has ended, the
incoming call is diverted to the extensions enabled to
ring for the present line.
Message ( ) playback
and free line
The message (11~30 o 91~92), defined by the
parameter, is played back and, once it has ended, the
line is freed.
Repeat prompting
message
The menu prompting message is repeated.
Menu ( ) recall
The menu (01~10) defined by the parameter is
recalled.
Menu ( ) recall, with
user PWD
Once the user password has been entered, the menu
(01~10) defined by the parameter is recalled.
Relay ( ) ON
The relay (01~02), defined by the parameter is
enabled (contact is closed). If the parameter 00 is
entered, the choice of the relay must be made by the
caller during the use phase.
Relay ( ) OFF
The relay (01~02), defined by the parameter is
disabled (contact is open). If the parameter 00 is
entered, the choice of the relay must be made by the
caller during the use phase.
Relay ( ) impulse
The relay (01~02), defined by the parameter is
enabled for 1 programmable second. If the parameter
00 is entered, the choice of the relay must be made by
the caller during the use phase.
Access to remote
programmer with
installer PWD
Once the installer password has been entered, it is
possible to access remote programmer.
Handsfree ambient
listening
Ambient listening is done through the handsfree
chosen by the caller during the use phase.
Handsfree ambient
listening ( )
The telephone handsfree (401~412), defined by the
parameters, turns on allowing ambient listening.
Note: we recommend inserting relay programming in a password-
protected menu.
