Pagina
30
HI-PRO 412 RACK (ISDN)
HI-PRO
280
RACK
(ISDN)
INSTALLATION
The following connections must be provided:
•
connection to a 230 Vac power supply socket
•
connection to external telephone networks, if needed
•
connection of BCA telephones
•
connection of ST 600 Personal Phone system telephones
•
connection of doorphone, if any
•
connection of actuator relays, if any
•
connection of digital inputs, if any.
Recommendations
- Do not install Hi-Pro Rack (ISDN) near other electronic or magnetic devices
if they were not designed to be combined with it.
- Do not lay the telephone cables near the 230 Vac mains.
Installation
Hi-Pro 412 Rack (ISDN) can be installed in a rack cabinet or wall-mounted
using mounting brackets supplied with PBX.
Rack installation
Remove the 3 screws shown as A, B and C in previous figure and the
other 3 on the opposite side.
Apply the rack mounting brackets to Hi-Pro 412 Rack (ISDN).
Fix the brackets by tightening the screws previously removed.
Fix Hi-Pro 412 Rack (ISDN) to the rack cabinet.
