204
Note:
The
Brightness
setting does not affect lamp brightness. To change the lamp brightness mode,
use the
Power Consumption
setting.
Parent topic:
Related references
Available Image Aspect Ratios
Available Color Modes
Input Signal Settings - Signal Menu
Normally the projector detects and optimizes the input signal settings automatically. If you need to
customize the settings, you can use the Signal menu. The available settings depend on the currently
selected input source.
Note:
You can restore the default settings of the
Position
,
Tracking
, and
Sync
settings by pressing the
Auto
button on the remote control.
To change settings for an input source, make sure the source is connected and select that source.
Summary of Contents for 696Ui
