ESON 696Ui User Manual Download Page 251

Page: 251 / 343

251

Transporting the Projector

The projector contains precision parts, some of which are glass. Follow these guidelines to transport,
ship, or store the projector safely:

• Remove any equipment connected to the projector.

• When transporting the projector a long distance or as checked luggage, pack it in a firm box with

cushioning around it and mark the box "Fragile."

• When shipping the projector for repairs, place it in its original packing materials, if possible, or use

equivalent materials with cushioning around the projector. Mark the box "Fragile."

Note:

Epson shall not be liable for any damages incurred during transportation.

Parent topic:

Maintaining and Transporting the Projector

Summary of Contents for 696Ui
























































































































































































































































































































































Search results

Summary of Contents for 696Ui

Reviews:

Related manuals for 696Ui

Brands by name

Popular brands

ESON 696Ui, User Manual

Search results

Summary of Contents for 696Ui

Reviews:

Related manuals for 696Ui

Brands by name

Popular brands