125
Parent topic:
Projecting Two Images Simultaneously
Using Multiple Projectors
You can combine the projected images from two or more projectors to create one large image. Follow
the instructions in these sections to setup and project from multiple projectors.
Projector Identification System for Multiple Projector Control
Setting the Projector ID
Setting the Remote Control ID
Adjusting Color Uniformity
Adjusting the Lamp's Brightness
Matching the Image Colors
Adjusting RGBCMY
Parent topic:
Projector Identification System for Multiple Projector Control
You can operate multiple projectors using one remote control for more elaborate presentations. To do
this, you assign an identification number to each projector and to the remote control. Then you can
operate all the projectors at once or individually.
Note:
In some cases the brightness and color tone from different projectors may not match completely
even after color correction. If the brightness and color tone differences become more noticeable over
time, repeat the adjustments.
Parent topic:
Setting the Projector ID
If you want to control multiple projectors from a remote control, give each projector a unique ID.
1.
Press the
Menu
button.
2.
Select the
Extended
menu and press
Enter
.
3.
Select the
Multi-Projection
setting and press
Enter
.
Summary of Contents for 696Ui
