background image

English

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.

1.  To clean the LCD monitor screen: 

• 

Turn off the LCD monitor and unplug the power cord.

• 

Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2.  Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage 

it. 

3.  Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display. 

4.  Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of 

any nature. 

5.  Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside 

this range may result in permanent damage.

6.  Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:

• 

Monitor-to-PC signal cable is frayed or damaged. 

• 

Liquid spills onto the LCD monitor or the monitor is exposed to rain. 

• 

The LCD monitor or case is damaged. 

Package contents 

LCD monitor Power cord

Audio cable 

(optional)

DVI cable  

(optional)

HDMI  cable  

(optional)

VGA cable

(optional)

Quick start 

guide

C B 2 71 H 

Attaching the monitor to the base

1.  Remove the monitor from the packaging.

2.  Attach the footstand to the base. (for selected models).

3.  Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)

4.  Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)

Connecting your monitor to a computer

1.  Turn off your computer and unplug your computer's power cord.

2.  Connect the signal cable to the VGA (optional) and /or DVI-D 

(optional) and/or HDMI (optional) input socket of the monitor, and 

the DVI-D (optional) and/or HDMI (optional) output socket of the 

graphics card on the computer. Then tighten the thumbscrews on 

the signal cable connector.

3.  Optional: Connect the audio input socket (AUDIO IN) of the LCD 

monitor and the line-out port on the computer with the audio cable.

4.  Insert the monitor power cable into the power port at the back of the 

monitor.

5.  Plug the power cords of your computer and your monitor into a 

nearby electrical outlet. 

 

2

Reviews: