166
• To use the pen as a mouse in PC Interactive mode, do the following:
• To left-click, tap the board with the pen tip.
• To double-click, tap twice.
• To right-click, press the button on the side or press and hold the pen on the screen (Windows).
• To click and drag, tap and drag with the pen.
• To move the cursor, hover over the board without touching it.
Note:
You can turn off the hovering feature using the
Hovering
setting in the projector's Easy
Interactive Function menu.
Note:
To make a long press of the pen act as a right-click on a Mac, set the
Pen Operation Mode
setting to
Ubuntu Mode
and turn on the
Enable Right Click
setting.
Parent topic:
Related tasks
Replacing the Hard Pen Tips
Replacing the Soft Pen Tips
Installing Batteries in the Pens
Pen Calibration
Calibration coordinates the position of the pen with the location of your cursor. You only need to calibrate
the first time you use your projector's interactive features. Calibration results remain until you calibrate
again.
Be sure to calibrate the pen before performing finger touch calibration.
Summary of Contents for 696Ui
