159
You see the main toolbar on the side and the projection control toolbar on the bottom of the
projected image.
3.
To move the main toolbar to the other side of the screen, tap the
arrow on the opposite side of
the screen.
Note:
You can use the pen or your finger to move the arrow icon up or down to reposition the
toolbar.
4.
To switch to one of the other interactive modes, do one of the following:
• To switch to built-in whiteboard mode, select
.
• To switch to PC Interactive mode, select
, then select
.
Note:
You can also press the
Pen Mode
button on the remote control to switch between modes.
Summary of Contents for 696Ui
