ESON 696Ui User Manual Download Page 101

Page: 101 / 343

101

Turn on the projector and display an image.

Adjust the image size using the

(Wide) and

(Tele) buttons.

After you adjust the image size, the Image Shift screen is displayed automatically.

Use the arrow buttons on the projector or remote control to adjust the image position.

Note:

You can also use the Settings menu to adjust the

Image Shift

setting.

Parent topic:

Using Basic Projector Features

Related references

Projector Feature Settings - Settings Menu

Focusing the Image

Turn on the projector and display an image.

Note:

You can display a pattern to aid in adjusting the projected image using the Settings menu.

Summary of Contents for 696Ui
























































































































































































































































































































































Search results

Summary of Contents for 696Ui

Reviews:

Related manuals for 696Ui

Brands by name

Popular brands

ESON 696Ui, User Manual

Search results

Summary of Contents for 696Ui

Reviews:

Related manuals for 696Ui

Brands by name

Popular brands