ESON 696Ui User Manual Download Page 149

Page: 149 / 343

149

Note:

Copy the projector's settings before you adjust the projected image using the projector's Geometry

Correction settings. Any saved User's Logo setting on the projector will transfer to the other projector.

Caution:

If the copy process fails due to a power failure, communication error, or for any other reason,

Epson will not be responsible for any repair costs incurred.

The following settings will not transfer between projectors:

• Info menu items

• Network menu settings other than those in the Notifications and Others menus

Note:

In addition to the methods covered this section, you can also copy and transfer settings to multiple

projectors over a network using the EasyMP Network Updater software. See the

EasyMP Network

Updater Operation Guide

for instructions. You can download the latest software and documentation from

the Epson web site.

Saving Settings to a USB Flash Drive
Transferring Settings From a USB Flash Drive
Saving Settings to a Computer
Transferring Settings From a Computer

Parent topic:

Adjusting Projector Features

Saving Settings to a USB Flash Drive

You can save the projector settings you want to transfer to a USB flash drive.

Note:

Use an empty flash drive. If the drive contains other files, the transfer may not complete correctly.

The flash drive must use the FAT format and cannot have any security features.

Turn off the projector and unplug the power cord from the projector's power inlet.

Summary of Contents for 696Ui
























































































































































































































































































































































Search results

Summary of Contents for 696Ui

Reviews:

Related manuals for 696Ui

Brands by name

Popular brands

ESON 696Ui, User Manual

Search results

Summary of Contents for 696Ui

Reviews:

Related manuals for 696Ui

Brands by name

Popular brands