ES AWH11-V5+, User Manual

Page: 13 / 86

The installation of the product should be handled by professional installers or under their
instructions.
＞
500mm
＞
100mm
＞
100mm
＞
500mm
2. Installation
2.2 Tools needed
2.3 Installation of the indoor control unit
Most people already have the tools needed for
installation: spirit level, pencil, crosshead
screwdriver, drill, 8 mm. concrete drill bit, detection
drill, square, tape measure or ruler, tape width 65
mm, hole saw about 80 mm (deviation in size may
occur), knife and two adjustable spanners or pliers
(and possibly torque wrench).
2.3.1 Installation notes
1)
2) The indoor unit shall be placed in dry and well-ventilated environment.
3) Indoor unit mustn't be installed in an environment where volatile, corrosive or flammable liquid
or gas exists.
4)
The indoor control unit should be installed indoors and mounted on the wall, with water outlet
downwards.
control
control
control
Please choose a suitable position to install the indoor control unit as follows:
Enough space should be left around the indoor unit for futher maintenance.
13