3. Usage
32
All the units sensor values (temperatures) and information of current running statue (compressor speed, voltage
and current) can be red and checked via operation panel in both ON/OFF statue. Press and buttons for 5
seconds in main interface, to activate the menu of current running statue. Press or buttons to check all working
status in sequence in accordance to below list. The current number is displayed where the clock is displayed in main
interface. See operation panel symbols in page...
Item
Meaning
1
19
2
20
3
21
4
22
5
23
6
24
7
25
8
26
9
27
10
28
11
29
12
30
13
31
14
32
15
33
Item
Meaning
User level Parameter under basic operation level can be set in "OFF" mode only. Press "SET"+"M" for 5 seconds,
Parameter will shown on the display. Press or to check parameter values for each paramter in sequence.
Item
Sub-menu
Unit Statue
Operation
Level
Default factory
settings
Hot Water restart based on water ∆T
Heating restarts based on water ∆T
Cooling restarts based on water ∆T
Cooling and heating switch judgment
User level
Parameter
Check in
ON/OFF, Set
in OFF
User
5°
2°
2°
0 (OFF)
Page in
the menu
44
44
DHW Set Temp
16
34
17
35
18
36
Heating Set Temp
Cooling Set Temp
Room Set Temp
Ambient temperature
Hot water temperature
Heating water temperature
Cooling water temperature
Room temperature
Unit outlet temperature
Unit inlet temperature
System 2
temperature
indoor coil
System 2 voltage (V)
System 2 current (A)
System 2
(Hz)
compressor speed
System 2 comp.
discharge temp.
System 2
temperature
outdoor coil
System 2
suction temperature
System 2 evaporating pressure
System 2 condensing pressure
System 2 EEV position
System 1 indoor coil temperature
System 1 voltage (V)
System 1 current (A)
System 1 compressor speed (Hz)
System 1 outdoor coil temperature
System 1 comp. discharge temp.
System 1 suction temperature
System 1 evaporating pressure
System 1 condensing pressure
System 1 EEV position
Indoor Unit Software Version
System
Version
2 Outdoor Unit Software
System
Version
1 Outdoor Unit Software
Water outlet Temp.
Too Low Protection
Water outlet Temp.
Too High Protection
Summary of Contents for AWH11-V5+
