ERNITEC MicroView MVIB-01IR-E, User Manual

Page: 154 / 172

Network Camera User Manual
153
Configuring Net HDD
Before you start:
The network disk should be available within the network and properly configured to
store the recorded files, log files, pictures, etc.
Steps:
1.
Add Net HDD.
(1)
Enter the Net HDD settings interface, Configuration > Storage > Storage
Management > Net HDD .
Add Network Disk
(2)
Enter the IP address of the network disk, and enter the file path.
(3)
Select the mounting type. NFS and SMB/CIFS are selectable. And you can set
the user name and password to guarantee the security if SMB/CIFS is selected.
Note: Please refer to the NAS User Manual for creating the file path.

For your privacy and to better protect your system against security risks,
we strongly recommend the use of strong passwords for all functions and
network devices. The password should be something of your own choosing
(using a minimum of 8 characters, including at least three of the following
categories: upper case letters, lower case letters, numbers and special
characters) in order to increase the security of your product.

Proper configuration of all passwords and other security settings is the
responsibility of the installer and/or end-user.