ERNITEC MicroView MVIB-01IR-E, User Manual

Page: 138 / 172

Network Camera User Manual
137
The minimize pupil distance refers to the minimum square size composed by
the area between two pupils, and it is the basic standard for a camera to
identify a target.
3.
Click the hexagons sign to draw the detection area you want the face
capture to take effect. Draw area by left click end-points in the live view
window, and right click to finish the area drawing.
Notes:

Polygon area (4~10 sides) sides is supported.
 If the live view is stopped, there is no way to draw the configured area.
4.
Click Save to save the settings.
 Advanced Configuration
Face Capture Version: It lists the version of the algorithms library.
Configure the following parameters according to your actual environment.
Face Capture
Detection Parameters:
Generation Speed [1~5]: The speed to identify a target. The higher the value, the faster
the target will be recognized. Setting the value quite low, and if there was a face in the
configured area from the start, this face will not be captured. It can reduce the
misinformation of the faces in the wall painting or posters. The default value of 3 is