Maintaining and Transporting the Projector
85
Cleaning the Air Filter
Clean the air filter at the bottom of the projector after every 100 hours
of use. If it is not cleaned periodically, it can become clogged with
dust, preventing proper ventilation. This can cause overheating and
damage the projector. To clean the air filter, follow these steps:
1. Turn off the projector and unplug the power cable.
2. Turn the projector on its side so that the handle is on top and you
can access the filter easily.
3. To clean the filter, use a small vacuum designed for cleaning the
inside of computers and other office equipment. If you don’t have
one, you can use a very soft brush (such as an artist’s camel hair
brush).
4. If the dirt is difficult to remove or if the filter is torn, replace it.
Contact your dealer or call EPSON at (800) 873-7766 in the
United States and Canada to obtain a new one.
note
When you get a
replacement lamp for your
projector, a new air filter is
included. You should
replace the filter when you
replace the lamp.
