Introduction
9
■
Connecting a USB device
For more sophisticated presentations, you can connect a USB
device, such as a mouse or drawing tablet. This lets you draw
on-screen, makes notes, and highlight your presentation. See
page 34 for details.
■
Including sound in a presentation
If you’re installing the projector in a conference room, a sound
system is probably already in place. If no sound system is available
and your presentation includes sound, you can connect an audio
cable to use the projector’s built-in stereo speakers. For details, see
page 24 (for computers) or the section starting on page 27 for
video devices.
■
Controlling the projector settings from a computer
The projector’s settings can be accessed through a menu system
using the buttons on the control panel or the remote control (see
“Fine-tuning the Projector” on page 63). If the projector is
ceiling-mounted or set up for rear-screen projection, it may be
easier to access the settings from your computer. You can either
use a browser (if the projector is connected to the network) or the
EMP Link V software program. For details, see page 64.
Getting Help
If you experience a problem with the projector, check for help in one
of these places:
■
To replace the air filter or lamp, or for other maintenance advice,
turn to page 83.
■
For troubleshooting tips on setting up and using the projector,
turn to page 91.
If you still need help after checking these sources, you can use the
EPSON PrivateLine
®
Support service. Call (800) 637-7661 and enter
the PIN on the PrivateLine card in your
Owner’s Kit
. Or take
advantage of EPSON’s automated support services 24 hours a day. See
“Where To Get Help” on page 103 for more information.
