Fine-tuning the Projector
65
2. Select how the projector is connected (by a serial cable or over the
network) and then choose the correct COM port or networked
projector name, if necessary.
Once connected, you see the EMP Link V control panel.
Many of the settings are the same as those used in the projector’s
menu system, described starting on page 67. For more information,
see the online EMP Link V
User’s Guide
. (Click
Start
,
Programs
,
and
EasyMP
, then click
EMP Link V
and select
User’s Guide
.)
Using a Browser
To control the projector from a standard web browser, the projector
must be connected to a network (as described on page 31) and
properly configured to the network as described on page 48.
1. Open a web browser (such as Microsoft Internet Explorer) and
enter the projector’s IP address as the location you want to go to.
