Displaying and Adjusting the Image
41
Adjusting the Height of Your Image
You can adjust the height of the image using the lens shift knob and
the projector’s feet.
Using the Lens Shift Knob
Use the lens shift knob to raise or lower the image. If the knob is
recessed, press and release it to make it extend; then turn it clockwise
or counterclockwise to move the lens up or down. When you’re
finished, press the knob back in.
Using the Projector’s Feet
If the image is still too low, you can raise it by extending the
projector’s feet.
1. Stand behind the projector. Pull up the blue foot release levers
and lift the front of the projector. This unlocks the feet.
lens shift knob
caution
Do not hold the projector by
the lens; this can damage it.
