92
Solving Problems
What To Do When the Lights Flash
The lights on top of the projector indicate the projector’s status and
let you know when a problem occurs.
If the projector is not working correctly, first turn it off and unplug it.
Then plug the power cord back in and turn on the projector. If this
does not solve the problem, check the status lights on top of the
projector and try the solutions recommended below.
power light
lamp light
temperature light
Light
Status
Description
does not come on
Make sure the power cord is connected securely. If you’ve just
replaced the lamp, make sure its cover is fastened securely.
green
The projector is operating normally.
flashing green
The projector is warming up. Wait for the image to appear.
orange
The projector is in sleep mode. You can unplug it to turn it off or press
the
Power
button to turn it on.
flashing orange
The lamp is cooling down. Don’t unplug the projector until the light
stops flashing. If you want to turn the projector back on, wait until the
light stops flashing and press the
Power
button.
red
Power is cut off because of an internal problem. Remove the power
cord and contact EPSON for help; see page 103.
flashing orange
The lamp is almost burned out. This is a good time to replace it. See
page 86 for instructions.
flashing red
The lamp is burned out. Replace it as described on page 86.
