Epson EMP-8150 - XGA LCD Projector Administrator'S Manual Download Page 88

Page: 88 / 135

Maintaining and Transporting the Projector

Follow these steps to replace the lamp:

1. Turn off the projector and unplug the power cable.

2. Allow the projector to cool down for at least an hour (if it has

been on).

3. Use a screwdriver to loosen the two retaining screws on the lamp

cover. (You cannot remove these screws from the cover.) After
loosening the screws, lift off the lamp cover.

4. Use a screwdriver to loosen the three screws holding the lamp in

place. (You cannot remove these screws.)

5. Lift up the handle and pull out the lamp.

warning

Let the lamp cool before
replacing it. If the lamp
breaks, handle the shards
carefully to avoid injury.

handle

Summary of Contents for EMP-8150 - XGA LCD Projector








































































































































Search results

Summary of Contents for EMP-8150 - XGA LCD Projector

Reviews:

Related manuals for EMP-8150 - XGA LCD Projector

Brands by name

Popular brands

Epson EMP-8150 - XGA LCD Projector, Administrator'S Manual

Search results

Summary of Contents for EMP-8150 - XGA LCD Projector

Reviews:

Related manuals for EMP-8150 - XGA LCD Projector

Brands by name

Popular brands