52
Setting up EasyMP.net
Giving Users Access to the Projector
To enable users to send their presentations to the projector, you need
to install the EMP software on each user’s system. Once it’s installed,
you should open the software and identify the projector so that it can
be easily recognized whenever the software is used.
Installing the Software
Follow the steps below to install the EMP software. Make sure each
system on which you install it meets these requirements:
1. Close any open applications.
2. Insert the EasyMP.net Software CD-ROM.
After a moment, the CD auto-runs and you see the following
screen:
(If the CD doesn’t auto-run, double-click
Setup.exe
in the root
folder of the CD-ROM.)
Operating system
Windows 95, 98, NT 4.0, or 2000
Available RAM
32MB or more
Hard drive space
10MB or more (an additional
10MB is required if you choose to
install Adobe
Acrobat
)
Monitor
VGA (640
×
480) or better
note
The EasyMP.net software
cannot be used on a
Macintosh.
