Epson AL-M200 Series User Manual Download Page 89

Page: 89 / 232

Installing Print Drivers on Computers Running Linux (CUPS)

This section provides information on installing and setting up print drivers with CUPS (Common
UNIX Printing System) on Red Hat

Enterprise Linux

6 Desktop (x86), SUSE

Linux Enterprise

Desktop 11 (x86), and Ubuntu 10 (x86). For the information on the previous versions of the Linux
operating systems, visit respective web sites.

Installing Print Drivers

Note:

The print driver

Epson-AL-M200-x.x-y.noarch.rpm

epson-al-m200_x.x-y_all.deb

is included

in the

linux

folder on the Software Disc.

For Red Hat Enterprise Linux 6 Desktop (x86)

1. Double-click

Epson-AL-M200-x.x-y.noarch.rpm

on the Software Disc.

2. Click

Install

3. Enter the administrator's password, and then click

Authenticate

Installation starts. When the installation is complete, the window automatically closes.

For SUSE Linux Enterprise Desktop 11 (x86)

1. Double-click

Epson-AL-M200-x.x-y.noarch.rpm

on the Software Disc.

2. Click

Install

3. Enter the administrator's password, and then click

Authenticate

Installation starts. When the installation is complete, the window automatically closes.

For Ubuntu 10 (x86)

1. Double-click

epson-al-m200_x.x-y_all.deb

on the Software Disc.

2. Click

Install Package

3. Enter the user password, and click

AL-M200 Series User’s Guide

Printer Connection and Software Installation

Summary of Contents for AL-M200 Series









































































































































































































































Search results

Summary of Contents for AL-M200 Series

Reviews:

Epson AL-M200 Series, User Manual, Page: 89 / 232

Search results

Summary of Contents for AL-M200 Series

Reviews: