Epson AL-M200 Series Page 34 User Manual Download

Page: 34 / 232

2. Enter

cmd

, and then press the

Enter

key.

A black window appears.

3. Enter

ping xx.xx.xx.xx

(where

xx.xx.xx.xx

is the IP address of your printer), and then press the

Enter

key.

4. Reply from the IP address denotes printer is active on the network.

Printing and Checking the System Settings Page

Print the System Settings page and check your printer's IP address.

Using the Operator Panel

Note:

The reports and lists are all printed in English.

1. Press the

(

Menu

) button.

2. Select

Report / List

, and then press the

button.

3. Select

System Settings

, and then press the button.

The System Settings page is printed.

4. Confirm the IP address next to

IP Address

under

Wired Network

(AL-M200DN) or

Wired

Network/Wireless Network

(AL-M200DW) on the System Settings page. If the IP address is

0.0.0.0

, wait for a few minutes to resolve the IP address automatically, and then print the System

Settings page again.

If the IP address is not resolved automatically, see “Assigning an IP Address (for IPv4 Mode)” on
page 31.

Using the Printer Setting Utility

The following procedure uses Windows 7 as an example.

AL-M200 Series User’s Guide

Printer Connection and Software Installation

Summary of Contents for AL-M200 Series









































































































































































































































Search results

Summary of Contents for AL-M200 Series

Reviews:

Related manuals for AL-M200 Series

Brands by name

Popular brands

Epson AL-M200 Series, User Manual

Search results

Summary of Contents for AL-M200 Series

Reviews:

Related manuals for AL-M200 Series

Brands by name

Popular brands