Epson AL-M200 Series Page 28 User Manual Download

Page: 28 / 232

2. Twist the Ethernet cable around the ferrite core shipped with the printer as shown in the figure,

and then close the ferrite core.

Ferrite core

Connector to be plugged into the Ethernet port of the printer

Approx. 7 cm

Important:

Do not twist the Ethernet cable too tightly as it may break the cable.

3. Connect one end of an Ethernet cable to the Ethernet port on the rear of the printer, and the other

end to a LAN drop or hub.

* Ethernet port

Note:

Do not connect the Ethernet cable when you intend to use the wireless network feature of the
AL-M200DW model.

AL-M200 Series User’s Guide

Printer Connection and Software Installation

Summary of Contents for AL-M200 Series









































































































































































































































Search results

Summary of Contents for AL-M200 Series

Reviews:

Related manuals for AL-M200 Series

Brands by name

Popular brands

Epson AL-M200 Series, User Manual

Search results

Summary of Contents for AL-M200 Series

Reviews:

Related manuals for AL-M200 Series

Brands by name

Popular brands