manualshive.com logo in svg

Epson AL-M200 Series, User Manual

The Epson AL-M200 Series user manual is a comprehensive guide designed to assist users in maximizing their experience with this top-notch printer. With easy-to-follow instructions and in-depth explanations, this manual is a valuable resource for troubleshooting and maintenance. Download it for free from our website, manualshive.com, and unleash the full potential of your Epson AL-M200 Series.

Share
Download
background image

3. Select 

Add a network, wireless or Bluetooth printer

. If the printer is listed, select the printer

and click 

Next

, or select 

The printer that I want isn't listed

 and enter the path to the printer in

the 

Select a shared printer by name

 text box and click 

Next

.

For example:\\[server host name]\[shared printer name]

The server host name is the name of the server computer that identifies it on the network. The
shared printer name is the name assigned during the server installation process.

If this is a new printer, you may be prompted to install a print driver. If no system driver is
available, specify the location where the driver is available.

4. Confirm the printer name, and then select whether to use your printer as the default printer and

click 

Next

.

5. If you want to verify installation, click 

Print a test page

.

6. Click 

Finish

.

When a test page is printed successfully, installation is complete.

For Windows Server 2008 and Windows Server 2008 64-bit Edition

1. Click 

Start

 — 

Control Panel

 — 

Hardware and Sound

 — 

Printers

.

2. Click 

Add a printer

 to launch the 

Add Printer

 wizard.

AL-M200 Series     User’s Guide

Printer Connection and Software Installation     

79

Summary of Contents for AL-M200 Series









































































































































































































































Reviews:

No comments

Related manuals for AL-M200 Series

WaxJet 6100 Service Reference Manual preview
6100
Brand: WaxJet Pages: 131
NEC NEFAX - 691 B/W Laser Introduction Manual preview
NEFAX - 691 B/W Laser
Brand: NEC Pages: 20
Dascom DP-520 User Manual preview
DP-520
Brand: Dascom Pages: 12
Dascom DP-510 Operator'S Manual preview
DP-510
Brand: Dascom Pages: 19
Dascom DC-7600 Assembly Instructions preview
DC-7600
Brand: Dascom Pages: 5
Panduit LS7 Operator'S Manual preview
LS7
Brand: Panduit Pages: 74
Tally T2380 Specifications preview
T2380
Brand: Tally Pages: 2
Tally Dascom DT-210 Programmer'S Manual preview
DT-210
Brand: Tally Dascom Pages: 57
Fenix SM2000 Operation Manual preview
SM2000
Brand: Fenix Pages: 65
Oki C5550 MFP Reference Manual preview
C5550 MFP
Brand: Oki Pages: 167
Oki C610dn Manual De L'Utilisateur preview
C610dn
Brand: Oki Pages: 116
Oki C610dn Material Safety Data Sheet preview
C610dn
Brand: Oki Pages: 52
Oki C6000dn Manual Do Utilizador preview
C6000dn
Brand: Oki Pages: 331
Oki C6000dn Setup Manual preview
C6000dn
Brand: Oki Pages: 36
Oki C5800Ldn Series Reference Manual preview
C5800Ldn Series
Brand: Oki Pages: 143
Oki C710dn Guía Del Usuario preview
C710dn
Brand: Oki Pages: 101
Oki C710 Brochure & Specs preview
C710
Brand: Oki Pages: 6
Oki B6250dn Safety And Warranty Manual preview
B6250dn
Brand: Oki Pages: 36

Brands by name

Popular brands

Load more brands