manualshive.com logo in svg

Epson AL-M200 Series, User Manual, Page: 56 / 232

Share
Download
Epson AL-M200 Series User Manual Download Page 56

If you see any errors, click 

Trouble Shooting Guide

 and follow the instruction.

4. Check if the printer to be installed is listed in the 

Select Printer

 screen, and then click 

Next

.

Note:

If the printer to be installed is not listed in the 

Select Printer

 screen, try either of the following steps:

❏

Click 

Refresh

 to update the information.

❏

Click 

Add Printer

, and then enter the details of the printer manually.

5. Configure the required items on the 

Enter Printer Settings

 screen, and then click 

Next

.

6. Select the software to be installed, and then click 

Install

.

7. Click 

Finish

 to exit this tool.

The wireless configuration is complete.

Note:

For the 

WPS-PBC

 operation on the wireless LAN access point, refer to the manual supplied with the

wireless LAN access point.

AL-M200 Series     User’s Guide

Printer Connection and Software Installation     

56

Summary of Contents for AL-M200 Series









































































































































































































































Reviews:

No comments