PS Data Format
Purpose:
To set the PS data communications protocol. To make any changes effective, turn off the printer and
then turn it back on.
Values:
Auto
*
Sets the PS data communications protocol automatically.
Standard
Sets the PS data communications protocol to
Standard
.
BCP
Sets the PS data communications protocol to
BCP
.
TBCP
Sets the PS data communications protocol to
TBCP
.
*
Factory default menu setting
System Settings
Use the
System Settings
menu to configure a variety of printer features.
Power Saving Timer
Purpose:
To specify a time period before the printer enter each power saver mode.
Values:
Low Power
Timer
1min
*1
By default, the printer enters Low Power mode in one
minute of inactivity after completion of the last job.
You can change the
Low Power Timer
setting within
a range from 1 to 45 minutes.
1min
-
45min
Sleep Timer
6min
*1
By default, the printer enters Sleep mode in six
minutes of inactivity starting from the moment it
entered Low Power mode. You can change the
Sleep
Timer
setting within a range from 6 to 11 minutes.
6min
-
11min
AL-M200 Series User’s Guide
Using the Operator Panel Menus
150
