c If you want to set a printer as the default for printing, select the
Set this printer as default
for printing
check box.
7. Select the software and documentation you want to install, and then click
Install
. You can specify
folders in which to install the software and documentation. To change the folders, click
Browse
.
8. Click
Finish
to exit the wizard.
Configuring Wireless Network Settings (AL-M200DW only)
You can configure wireless network settings with
Easy Install Navi
.
Important:
❏
Be sure to obtain the SSID and security information from a system administrator in advance when
you use a communications standard other than WPS to configure wireless network settings.
❏
Ensure that the Ethernet cable has been disconnected from the printer before you configure the
wireless network settings.
The wireless network specifications are described below:
Item
Specification
Connectivity
Wireless
Connectivity Standard
IEEE 802.11b/g compliant
Bandwidth
2.4 GHz
Data Transfer Rate
IEEE 802.11b mode: 11, 5.5, 2, 1 Mbps
IEEE 802.11g mode: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Security
64 (40-bit key)/ 128 (104- bit key) WEP, WPA- PSK (TKIP, AES), WPA2-PSK (AES)
(IEEE802.1x attestation function of WPA 1x non-corresponds)
Certifications
Wi-Fi, WPA2.0 (Personal)
Wi-Fi Protected Setup (WPS)
Push Button Configuration (PBC), Personal Identification Number (PIN)
You can select a method to configure wireless network settings from the following:
Wizard
Setup Through USB Connection
AL-M200 Series User’s Guide
Printer Connection and Software Installation
40