Epson AL-M200 Series User Manual Download Page 145

Page: 145 / 232

Auto

Detects the Ethernet settings automatically.

10BASE-T Half

Uses 10base-T half-duplex.

10BASE-T Full

Uses 10base-T full-duplex.

100BASE-TX Half

Uses 100base-TX half-duplex.

100BASE-TX Full

Uses 100base-TX full-duplex.

Factory default menu setting

Note:

This menu item appears only when the printer is connected to a wired network.

Wi-Fi Status (AL-M200DW only)

Purpose:

To display the information on the wireless signal strength. No changes can be made on the operator
panel to improve the status of the wireless connection.

Values:

Good

Indicates good signal strength.

Acceptable

Indicates marginal signal strength.

Low

Indicates insufficient signal strength.

No Reception

Indicates that no signal is received.

Note:

This menu item appears only when the printer is connected to a wireless network.

Wi-Fi Setup (AL-M200DW only)

Purpose:

To configure wireless network settings.

Values:

AL-M200 Series User’s Guide

Using the Operator Panel Menus

145

Summary of Contents for AL-M200 Series









































































































































































































































Search results

Summary of Contents for AL-M200 Series

Reviews:

Epson AL-M200 Series, User Manual, Page: 145 / 232

Search results

Summary of Contents for AL-M200 Series

Reviews: