epiphan video Pearl Nano, User Manual

Page: 115 / 484

Pearl Nano User Guide Install and format a SATA M.2 2280 SSD
4. Use a #0 Phillips screwdriver to remove the screw that's in the post farthest away from the M.2
socket. Set aside for later.
5. Hold the SSD by the edges and insert firmly into the M.2 socket at approximately a 30° angle. Make
sure you align the key notch in the SSD with the notch in the M.2 socket.
6. Use one hand to gently press and hold the SSD down so that it rests atop the post. Align the notch
on the SSD with the post hole.
7. With your other hand, use the #0 Phillips screwdriver to reinstall the post screw and secure the SSD
in place.
TIP : Use the tweezers to pick up the screw if it falls behind the SSD.
8. Reinstall the SSD slot cover plate and power up Pearl Nano.
The SSD is formatted automatically the first time you power on. Please be patient while formatting
completes. The amount of time it takes to format depends on the capacity of the SSD. You must wait for
the formatting to finish before recording video to the SSD.
Powering off Pearl Nanowhile the SSD is formatting could damage or corrupt the SSD.
102